Button Functions:
Slot
Dragon Racing Systems have no power switch and, like an ordinary alarm clock, is designed to be left "on"
all of the time. This will enhance your Raceways appearance 24/7 and gravitate people to the playing field . At
plug-in the default setting is 1 lap, singles mode, lane one.
Pressing the Mode Button cycles the mode as
follows: singles mode lane one--singles mode lane two--doubles mode and repeats.
Pressing the +10 Button adds
ten laps. Pressing both +10 and +1 buttons simultaneously (at the same time) resets the count to one lap.
Pressing the +1 Button adds one lap to the lap count.
As each car finishes the Display will show its Elapsed
Time (ET). Pressing the ET/RT Button will display Reaction Times.
With the SD2 the ET/RT
button has been changed to the DISPLAY button. Pressing the DISPLAY button will cycle through ET, RT/ Fastest Lap/ Average
Lap.
Pressing the Reset Button AFTER a race will reset to previous settings.
Pressing and holding the
Reset Button will reset the lap count one.
Requirements: A Track and a Car.
Snap-on sensor
assemblies are available for Two-Lane 1:32 Scalextric, SCX, Carrera, and Ninco/ Dslot
43/ all 75mm HO tracks.
SOME 1:32 CARS
MAY NOT BE COMPATABLE
WITH SNAP-ON STYLE IF THEIR DOWNFORCE MAGNETS HAVE BEEN REMOVED.
HO PANCAKE CHASSIS (4 gear/Tjets) AND the older LIKE LIKE "M" CHASSIS ARE NOT COMPATABLE WITH THE
SNAP-ON GATE SENSOR.
Our Photo Eye Sensors detect any car and can be installed on any track.
Installation requires drilling two 3mm holes in the track.